新一代光纖激光切割機-戰斧F6
基本工藝
· 床身鋼結構焊接后經時效或回火去應力處理,大型五面體加工中心一次性精加工成型。
· 橫梁采用高強度航空鋁材(非鑄鋁)經T6處理后CNC精加工而成,低慣量、高動態響應,更節能。
· 投入大量模具使零部件更加精密一致。
· 模塊化設計使售后更加經濟,快捷。
· 根據客戶的實際需求選擇不同功率的進口或國產激光器,適配功率段2000W—8000W
Basic Technology
The beam used by high strength aeronautical aluminum material, After T6 treatment, CNC finished, Low inertia, High dynamic response, More energy saving
· Bed steel structure,after welding, stress treatment by aging or tempering. Large five face machining center, one time fine processing is made.
· The beam used by high strength aeronautical aluminum material(Non cast aluminum), After T6 treatment, CNC finished, Low inertia, High dynamic response, More energy saving
· Invest in a large number of moulds to make the parts more accurate.
· Modular design makes after sale more economical,fast.
· According to the actual needs of customers, we choose different power imported or domestic lasers, Suitable power section 2000W - 8000W.
特點:
業內**一款床身兩側對稱設計,將光線及電纜拖鏈置于床身之內,更便于操作者從床身兩側任意上下料。
Characteristic:
The only symmetrical design on both sides of the bed in the industry, Light and cable trailing put into the machine tool body, It is more convenient for operators to pick and feed materials from both sides of machine tool.
人性化設計,內斂而不外張,用科學、嚴謹的態度來詮釋對于機械設備必須以人為本的深度理解.
戰F6 :Humanization design, Introverted, Using scientific and rigorous attitude to interpret the deep
understanding of mechanical equipment must be people-oriented.
技術參數:
加工幅面 Cutting Area |
6500mm*2000mm |
X軸行程 X Axis Stroke |
2000mm |
Y軸行程 Y Axis Stroke |
6500mm |
Z軸行程 Z Axis Stroke |
150mm |
運行速度 MOVING Speed |
100米/分鐘 100 meters / minute |
重復定位精度 |
0.02mm |
驅動方式 Driver |
伺服 Servo |
傳動方式 Transmission |
X ,Y軸齒輪齒條,Z軸滾珠絲杠 X, Y shaft gear rack, Z axle ball screw |
激光輸出波長 Laser Output Wavelength |
1.06微米(1.06μm) |
光電轉換率 Photoelecteic Conversion Rate |
30% 以上 More than 30% |
相數 Plase |
三相五線 Three-phase five-wire |
電源 Power |
380±5%
|
適用行業:機械、動車、船舶、環保、保險箱等。
Applicable industry:Machinery,
motor vehicles, ships, environmental protection, safety boxes and so on.